FOR WATER BASE PRODUCTS

FOR SOLVENT BASE ENAMEL

PHYSICAL PROPERTY / CHEMICAL PROPERTY INFORMATION

• Appearance :  Viscous Liquid
• Odour : Mild odour
• pH : 8.5 – 9.0
• Viscosity : Variable
• Melting or Freezing Point : Variable
• Boiling Point : Variable
• Solubility in Water : Diluteable
• %Volatile (by Wt.) : 60 Max.

STORAGE AND HANDLING INFORMATION

• Storage Temperature : Max. 60°C/140°F Min. 10°C/34°F
• Precautionary Labeling : Keep from freezing — product may coagulate.

EFFECT OF OVER EXPOSURE

• Inhalation : Vapor or mist can irritate the nose, throat and lungs.
• Eye and Skin Contact : Advised to avoid direct contact to eye & skin.

 FIRST-AID MEASURES

• Inhalation : Move subject to fresh air.
• Eye & Skin Contact : Flush eyes with a large amount of water for at least 15 minutes. See a physician, if irritation persists. Wash affected skin areas with soap and water.

 FIRE HAZARD INFORMATION

• Flash Point : Non-combustible
• Auto Ignition Point : Not applicable
• Lower Explosion Limit (%) : Not applicable
• Upper Explosion Limit(%) : Not applicable

STABILITY AND REACTIVITY

• Stability : Stable
• Conditions to Avoid : Temperature above 150°C
• Hazardous Decomposition : Not applicable

TOXICOLOGICAL INFORMATION

• Ingestion :  No adverse effects expected.
• Eye & Skin contact : Avoid direct contact to eye & skin.

WASTE DISPOSAL METHOD

If required to be disposed the liquid and diking material at permitted facility according to local, state and federal regulations.

PHYSICAL & CHEMICAL PROPERTIES

• Appearance : Smooth & uniform liquid
• Odour : Mild odour
• Viscosity : 80 Secs. to 150 Secs. in B-4 FC
• Flash Point : Above 30°C

 HANDLING AND STORAGE

• Store in cool, clean , ventilated, fire proof area.
• Keep away from heat, sparks, openflames & incompatible materials.
• Protect containers against physical damage.
• Keep containers closed when not in use.

 EXPOSURE CONTROLS / PERSONAL PROTECTION

• Ventilation Type : Sufficient ventilation in volume and pattern should be provided to keep air contaminant concentration below WES/TWA limits.
• Protective Gloves : Gloves of Neoprene or Nitrile rubber.
• Eye Protection : Solvent resistant safety eye wear.

 FIRE FIGHTING MEASURES

• Flash Point : > 30°C
• Extinguishing Media : Carbon Dioxide, Dry Chemical Foam and/or water Fog

 STABILITY AND REACTIVITY

• Stability : Stable
• Conditions to Avoid : Elevated temperatures, open flame arc or sparks.
• Incompatibility : Stoving oxidizers , acids & alkalies.(Materials to avoid.)